久久建筑网(www.99jianzhu.com)致力打造一个专业的建筑学习分享平台! | 用户登录 免费注册 | 投诉举报 | 会员中心 | 上传资料 |
NFPA13-2016标准高清带签.pdf
资料评价:
☆☆☆☆☆
生成时间:
2021-08-03
下载权限:
免费会员
文件大小:
16.3 MB
文件类型:
.pdf
浏览次数:
2
建筑论坛:
上传会员:
holle
所属栏目:
给排水文件
下载地址:
资料是由会员“holle”上传到本平台,如有不妥请联系客服。违规侵权投诉
2016 Handbook美国消防协会NFPA标准,英文版.pdf 带签高清
NFPA® 13
Standard for
the Installation of
Sprinkler Systems
2016 Edition
NFPA® 13
Standard for the
Installation of Sprinkler Systems
2016 Edition
This edition of NFPA 13, Standard for the Installation of Sprinkler Systems, was prepared by the
Technical Committees on Private Water Supply Piping Systems, Residential Sprinkler Systems,
Sprinkler System Discharge Criteria, and Sprinkler System Installation Criteria, released by
the Correlating Committee on Automatic Sprinkler Systems, and acted on by NFPA at its June
Association Technical Meeting held June 22–25, 2015, in Chicago, IL. It was issued by the
Standards Council on August 18, 2015, with an effective date of September 7, 2015, and
supersedes all previous editions.
Six tentative interim amendments (TIAs), indicated by boxed notices at the appropriate
areas within the document, were issued on August 18, 2015. For further information on
tentative interim amendments, see Section 5 of the NFPA Regulations Governing the Development of NFPA Standards, available at: http://www.nfpa.org/regs.
This edition of NFPA 13 was approved as an American National Standard on September 7,
2015.
Origin and Development of NFPA 13
NFPA 13 represents the first standard published under the auspices of the NFPA Committee on Automatic Sprinklers. Originally titled Rules and Regulations of the National Board of Fire
Underwriters for Sprinkler Equipments, Automatic and Open Systems, the standard has been continuously updated to keep in step with change.
Full information about the NFPA actions on various changes will be found in the NFPA
Proceedings. The dates of successive editions are as follows: 1896, 1899, 1902, 1905, 1907,
1908, 1912, 1913, 1915, 1916, 1917, 1919, 1920, 1921, 1922, 1923, 1924, 1925, 1926, 1927,
1928, 1929. In 1930, a separate standard was published on Class B systems. This was integrated
into the 1931 edition. Further revisions were adopted in 1934, 1935, and 1936. A two-step
revision was presented in the form of a progress report in 1939 and finally adopted in 1940.
Further amendments were made in 1947, 1950, 1953, 1956, 1958, 1960, 1961, 1963, 1964,
1965, 1966, 1968, 1969, 1971, 1972, 1973, 1974, 1975, 1976, 1978, 1980, 1982, 1984, 1986, and
1989.
The 1991 edition incorporated an entire rewrite of the standard to make the overall
format user friendly. Substantive changes were made to numerous terms, definitions, and
descriptions, with additional refinements made in 1994.
The centennial (1996) edition included a significant rework of the requirements pertaining to the application, placement, location, spacing, and use of various types of sprinklers.
Other changes provided information on extended coverage sprinklers and recognized the
benefits of fast-response sprinkler technology.
The 1999 edition encompassed a major reorganization of NFPA’s Sprinkler Project that
included the establishment of a Technical Correlating Committee on Automatic Sprinkler
Systems and four new sprinkler systems technical committees, the consolidation of NFPA’s
sprinkler system design and installation requirements, and the implementation of numerous
technical changes.
The scope of NFPA 13 was expanded to address all sprinkler system applications. The 1999
edition contained information on the installation of underground pipe from NFPA 24 and
sprinkler system discharge criteria for on-floor and rack storage of Class I, II, III, IV, and
plastic commodities, rubber tires, baled cotton, and roll paper that were previously located in
NFPA 231, 231C, 231D, 231E, and 231F. Additionally, sprinkler system information for specialized hazards from over 40 NFPA documents was either brought into NFPA 13 using NFPA’s
extract policy or specifically referenced. A new chapter was also added to address the structural aspects of exposed and buried system piping. A table of cross-references to previous
editions and material that was located in other NFPA documents was included at the end of
the 1999 edition.
热门推荐
点击排行
猜你还喜欢
-
满足NFPA要求的消防水泵房
- 所属分类:给排水资料
- 更新时间:2021-07-15
- 浏览次数:0
- 满足NFPA要求的消防水泵房满足NFPA要求的消防水泵房设计说明:无功能:泵站水厂设计阶段:施工图设计图纸张数:10张以下内容简介井墙及底板混凝土为C20、S4;钢筋^1-I级钢、^2-II级钢;钢筋锚固长度35d、搭接长度42d;混凝土净保护层35。 br
-
喷淋系统NFPA计算实例
- 所属分类:给排水资料
- 更新时间:2021-07-15
- 浏览次数:5
- 喷淋系统NFPA计算实例喷淋系统NFPA计算实例
-
NFPA标准系列---NFPA17
- 所属分类:工程技术
- 更新时间:2021-07-14
- 浏览次数:0
- NFPA标准系列---NFPA17NFPA标准系列---NFPA17
-
消防设施检测收费标准(北京消防协会执行标准)
- 所属分类:给排水资料
- 更新时间:2021-07-15
- 浏览次数:0
- 消防设施检测收费标准(北京消防协会执行标准)消防设施检测收费标准(北京消防协会执行标准)
-
NFPA 1035-2000+公共消防培训员专业资格鉴定+Public+F
- 所属分类:专业资料
- 更新时间:2021-07-20
- 浏览次数:0
- NFPA 1035-2000+公共消防培训员专业资格鉴定+Public+FNFPA codes, standards, recommended practices, and guides NFPA 1035-2000 公共消防培训员专业资格鉴定 Public Fire Educator Professional Qualifications 2000 Edition National Fire Protection Association
-
NFPA 72-2016
- 所属分类:电力文件
- 更新时间:2021-07-07
- 浏览次数:2
- NFPA 72-2016美国火灾报警系统设计标准,NFPA 72-2016版,分享给大家。
-
江苏省消防工程验收表格(省消防协会2000)
- 所属分类:合同表格
- 更新时间:2021-05-22
- 浏览次数:2
- 江苏省消防工程验收表格(省消防协会2000)江苏省消防工程验收表格(省消防协会2000)
-
NFPA1 Fire Code
- 所属分类:建筑文件
- 更新时间:2021-07-30
- 浏览次数:2
- NFPA1 Fire CodeNFPA 即“美国消防协会”(又译“国家防火委员会”),是一个国际性的规范和标准组织,旨在促进防火科学的发展,改进消防技术,组织情报交流,建立防护设备,减少由于火灾造成的生命财产的损失。NFPA 制订一系列防火
-
NFPA14 CODE
- 所属分类:专业资料
- 更新时间:2021-06-09
- 浏览次数:0
- NFPA14 CODENFPA14 美国消防协会 消防立管系统 原版CODE,2016最新版本
-
NFPA13-2016的HANDBOOK
- 所属分类:建筑文件
- 更新时间:2021-06-07
- 浏览次数:2
- NFPA13-2016的HANDBOOK
-
NFPA72 英文版本的美标火灾报警规范
- 所属分类:建筑文件
- 更新时间:2021-06-09
- 浏览次数:3
- NFPA72 英文版本的美标火灾报警规范本文件为英文版本的美标火灾报警规范,对于按美标设计的火灾自动报警系统,本规范是必须遵循的规范之一,分享给大家,希望对大家有所助益。
-
NFPA 101-2012 SELECT SIGNIFICANT CHANGES
- 所属分类:基础科学
- 更新时间:2021-07-08
- 浏览次数:0
- NFPA 101-2012 SELECT SIGNIFICANT CHANGESNFPA 101-2012 SELECT SIGNIFICANT CHANGES,NFPA 101-2012 SELECT SIGNIFICANT CHANGES。
-
中文版NFPA1211紧急通信系统的安装、维护和使用
- 所属分类:生产运营
- 更新时间:2021-06-04
- 浏览次数:0
- 中文版NFPA1211紧急通信系统的安装、维护和使用中文版NFPA1211紧急通信系统的安装、维护和使用,中文版NFPA1211紧急通信系统的安装、维护和使用。